DeLonghi MULTIFUNCTION BUILT-IN OVENS User Manual

14
TELESCOPIC SLIDING SHELF SUPPORTS
(MODELS WITH ELECTRONIC PROGRAMMER ONLY)
The telescopic sliding shelf supports make it safer and easier to insert and remove the
oven shelves and trays. They stop when they are pulled out to the maximum position.
Important! When fitting the sliding shelf supports, make sure that you fit:
■ The slides to the top wire of a rack. They do not fit on the lower wire.
■ The slides so that they run out towards the oven door.
■ Both sides of each pair of shelf slides.
■ Both sides on the same level.
■ Note: you cannot fit the sliding shelf supports to the top shelf position (fig. 16).
To fix the sliding shelf support onto the side racks:
■ Screw the side rack onto the oven wall (Figs. 11 - 12).
■ Fit the sliding shelf support onto the top wire of a rack and press (Fig. 16). You
will hear a click as the safety locks clip over the wire.
Left
Right
Figure 16

DeLonghi MULTIFUNCTION BUILT-IN OVENS Specifications

General

Brand	DeLonghi
Model	MULTIFUNCTION BUILT-IN OVENS
Category	Oven
Language	English