12
1. Disassemble the milk carafe. Refer to section “Disassembling the milk ca-
rafe”.
2. If a dishwasher is available: place all milk carafe components in the upper
part of your dishwasher.
If a dishwasher is not available: soak all components in hot potable water
(50°C / 122°F) together with a mild detergent for at least 30 minutes; then
rinse thoroughly with hot potable water (50°C / 122°F). Do not use scented
detergents.
8
Cleaning the milk carafe
This procedure must be performed aer each use. Dishwashing is recom-
mended. When a dishwasher is not available, the milk carafe components can be
washed by hand.
*
3. Clean the interior of the milk carafe, the milk spout and the knob with a mild
detergent and rinse with hot potable water.
* Make sure the Air inlet is clean, this will ensure beverage quality cup aer
cup.
Do not use abrasive material that might damage the surface of the equipment.
4. Dry all six components with a clean cloth and reassemble. Refer to section
“Assembling the milk carafe”.
Aer cleaning the milk carafe, if the milk frothing performance is still not to
your satisfaction, proceed with a second rinsing cycle by turning the knob to the
rinse position.
9
or
To Next Page
Loading...
Need help?
General
