DeLonghi Nespresso VERTUO LATTISSIMA - Page 9

9
10. The buons blink three times rapidly to confirm new seing.
11. The machine is now reprogrammed with the new water hardness seing
and turns automatically in ready mode.
3. Plug in the power cord.
4. Make sure that no accessory (milk carafe or descaling pipe) is connected
to the milk carafe connector hatch.
5. Turn the machine on.
NOTE: Programming the machine according to the actual hardness of the
local water supply ensures a longer lifetime for the appliance, as well as opti-
mizing the descaling process.
1x
6. Press hot foam buon for three seconds to enter the menu mode.
7. Clean and descale alerts blink together.
8. Press cappuccino buon , the system proposes one out of the five
combinations. If the selection is not done within 15 sec., it exits automati-
cally.
9. Set the hardness level by pressing the corresponding buon in below ta-
ble (within 15 seconds).
Water hardness Buon to press fH dH CaCO3
< 5 < 3 < 50mg/l
> 7 > 4 > 70mg/l
> 13 > 7 > 130mg/l
+
> 25 > 14 > 250mg/l
+
> 38 > 21 > 380mg/l