ELECTRICAL CONNECTIONS
check that:
indicated on the rating plate on the back of
the appliance;
for the appliance;
case, have the plug replaced;
outlet.
instructions absolves the manufacturer of all
liability.
WHAT IS THE PINGUINO
temperature of between
with a relative humidity of about 50%.
An air conditioner removes excess moisture and
heat from the room where it is located.
Compared with wall mounted models, portable
air conditioners have the advantage that they can
be moved from one room to another in the home
or be transported from one building to another.
Hot air from the room is passed through a coil
cooled by refrigerant gas. Excess heat and moi-
sture are removed before the air is re-emitted
into the room.
With portable air conditioners, a small part of this
air is used to cool the refrigerant gas and then,
when hot and damp, is discharged outside.
In the spring and autumn, the appliance can also
be used to heat.
heating capacity with low energy consumption.
All Pinguino models can also be used in fan-only
mode.
PREPARING FOR USE
your air conditioner for operation as efficiently
as possible.
grilles are unobstructed.
Air-conditioning without installation
Just a few simple steps and your comfort is en-
sured with your appliance:
F) in the housing at
the back of the appliance (fig. 1).
-
appliance in air conditioning and boost
(supercool) modes, you can also fit
the intake hose accessory (M) in its housing
in the back of the appliance as shown in figu-
re 1A. This step is optional.
hose (L/M).
window.
Sash window
(U) or (V) according to your needs, on the
window sill, extend the bracket fully within
the window frame, fix the bracket by using the
locking pin then lower the window onto the
exhaust hose (L) into the slot, then connect
the hose to the airconditioner (fig. 2 and 2A).
the window bracket also for sliding windows.
To Next Page
Loading...
