DeLonghi PAC WE125 - Preparing the Air Conditioner for Operation; Air-Conditioning Without Installation

5
• Ifyou have a sash window,place the win-
dowbracket (T)onthe windowsill,extend
the window bracket fully within the window
frame,x thewindowbracket byusingthe
locking pin then lower the window onto the
window bracket. Insert the window outlet
(N)oftheexhausthose(K)intotheslot,then
connectthehosetotheairconditioner(g.
4).
• Thanks to the locking pins, it’s possible to
use the window bracket also for sliding win-
dows.Positiontheholeofthewindowbra-
cket so to allow a correct installation of the
exhausthose(seegure5).
PREPARING FOR USE
Theinstructionsbelowwillenableyoutoprepare
your air conditioner for operation as efciently
as possible.
Beforeuse,makesuretheairintakeandoutlet
grilles are unobstructed.
Air-conditioning without installation
Just a few simple steps and your comfort is en-
suredwithyourappliance:
• Fittheairexhausthoseinthehousingatthe
backoftheappliance(g.1).
• Fitthe window outlet (N) to the end of the
hose(K).
• Placethe air conditioner near a window or
Frenchwindow.
• Adjust the length of the hose to reach the
window.
• Makesuretheairexhausthoseisunobstruc-
ted.
• OpenthewindoworFrenchwindowslightly
andpositiontheoutlet(g.2).
• Ifyouhaveadoublewindow,usethesucker
(Q) provided to hold the two parts of the win-
dowtogether(g.3).
1
2
1
2
2
3
1
4
5