DeLonghi TCH8093ER User Manual

6
Replace the cover as shown in the gure. Old batteries are
harmful to the environment and must be removed and
disposed of in compliance with current legislation.
MAINTENANCE
- Always unplug from the mains socket before
cleaning.
- During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a
vacuum cleaner.
- To clean the lter, remove the rear grille by pulling
it outwards (g. 1). Remove the dust lter which
retains impurities in the air drawn in from the room,
blow on it lightly then replace in the appliance.
- Never use abrasive powders or solvents to clean the
appliance.
TECHNICAL CHARACTERISTICS
Power supply See rating plate
Absorbed power “
PROBLEM CAUSE SOLUTION
PF display and emits a beep
Temperature sensor is not working
properly
The product needs to be serviced, contact
our toll free number for assistance
Product doesn’t turn on Check that the plug is connected to the
outlet
Auto-start is on
Room temperature reaches the set
temperature
Plug in
Wait till time elapsed or press the but-
ton (E) twice to cancel the auto-start
and push the button (A)
Use the “+” button to increase the set
temperature
The appliance goes o unexpectedly Check that the plug is connected to the
outlet
The set temperature has been reached
or the time set on the timer has elapsed
Plug in
A green dot is ashing and unit is o The tip-over switch has been activated Make sure the appliance is standing
upright on a at surface, if the problem
persists contact our toll free number to
assist you
TROUBLESHOOTING

DeLonghi TCH8093ER Specifications

General

Type	-
Heating power	2400 W
Heating power (min)	800 W
Adjustable thermostat	Yes
Suitable for room volume up to	70 m³
Product color	Black, White
Placement options	Floor
Heat source	Electric
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	269 mm
Width	275 mm
Height	695 mm