What to do if my DeLonghi Heater doesn't work?
If your DeLonghi Heater isn't working, make sure it's properly plugged into a working electrical outlet and check for any obstructions that might be preventing it from operating. Also, the temperature setting might be too low; try setting it to a higher position. If the appliance still doesn't work after these steps, contact De'Longhi.
Why does my DeLonghi Heater display show 'Ht' (High temperature)?
The 'Ht' message on your DeLonghi Heater indicates a high temperature, usually because the unit is covered or obstructed. Ensure that the unit is not covered by anything. The alarm should disappear once the internal temperature decreases.
What to do if my DeLonghi TRD40615E-6A Heater display shows 'PF'?
If your DeLonghi Heater's display shows 'PF', it indicates a probe failure. Contact De'Longhi.
Covers electrical safety, fire hazards, and precautions for children and the elderly.
Instructions for attaching the wheels to the appliance before use.
Covers unplugging, outdoor use, powering off, and checking for shipping damage.
Guidance on placement, power connection, heating functions, and temperature settings.
Explanation of ECO mode, working indicator, and display brightness adjustments.
Instructions for activating the key lock and setting the appliance timer for delayed operation.
How to change temperature units and understand appliance alarms and safety device warnings.
Guidance on how to clean and store the appliance safely when not in use.
Addresses problems like the appliance not working, probe failure, and high temperature warnings.
General| Model | TRD40615E-6A |
|---|---|
| Type | Oil-filled radiator |
| Power | 1500 W |
| Number of Fins | 6 |
| Thermostat | Yes |
| Heat settings | 3 |
| Wheels | Yes |
| Anti-frost function | Yes |
| Safety Features | Overheat protection |
To Next Page