Delphi GT 280 - Step 1 - Move CPA to Pre-Stage Position (Optional Component)

Assembly Manual
4 Way GT 280 Sealed Connection System
GT 2.8 Terminal System (Sealed)
© Delphi Corporation. All Rights Reserved
www.delphi.com
Assembly Manual - 33278895
24
STEP 1a – Move CPA to Pre-Stage Position (Optional Component)
STEP 1b – Move CPA to Pre-Stage Position (Optional Component)
DISASSEMBLY
SLIDE THE CPA BACK TO PLACE IT
IN PRE-STAGE
CPA IS NOW IN
PRE-STAGE POSITION
VERIFY AUDIBLE CLICK
IF NECESSARY, TOOL 12122647 COULD BE
USED TO PULL THE CPA BACK