28
Refer ence
Troubleshooting
SKYFi2 is designed and built to
provide you with trouble-free per-
formance without the need for
servicing. If it does not appear to
be functioning properly, follow
these troubleshooting steps first
to try to remedy the situation
yourself:
1. Attach all connections firmly
and securely.
2. Make sure the cigarette
lighter/auxiliary power socket
is clean and free of corrosion.
3. If you have installed SKYFi2 in a
vehicle and it does not power on,
check the 12V adapter fuse by
unscrewing the ribbed end of the
12V adapter. If required, replace
If you see this on the display:
NO SIGNAL
Cause: the XM signal is being
blocked.
ANTENNA
Cause: the XM antenna is not
plugged into SKYFi2.
OFF AIR
Cause: the channel selected is
not currently broadcasting.
You should:
Move SKYFi2’s antenna away from the obstruct-
ed area, e.g., an underground garage. Make sure
the vehicle antenna is mounted outside the vehi-
cle or the home antenna is positioned near a
south-facing window.
Make sure the antenna is correctly attached to
SKYFi2 and that the cable is not damaged or
kinked. Turn SKYFi2 off, then on, to reset this
message.
Tune to another channel.
with a 1-amp fuse only. If the 12V
adapter does not have a remov-
able end-cap, it has an internal
fuse that resets itself after it is left
unplugged for a period of time.
To Next Page
Loading...
Need help?
General
