Getting Started: Activating SKYFi
To quickly begin enjoying XM Satellite Radio,
follow these simple steps:
1. Set up your SKYFi Receiver using the instal-
lation instructions included in the SKYFi
Home Kit, SKYFi Vehicle Kit, or other kit, or
with the help of a professional installer.
2. Press the power button to turn the SKYFi
Receiver on and verify that it is playing
Channel 1, the XM Preview Channel.
3. Select Channel 0. The receiver’s eight-
character XM Satellite Radio ID number will
appear on the display. Write the number
here:
Note: Carefully check your XM Radio ID.
The letters I, O, S, and F are not used.
4. Activate your XM Satellite Radio service.
To subscribe, make sure you have a major
credit card and your XM Satellite Radio
ID number handy and contact XM at
http://activate.xmradio.com. You can
also activate your service by calling
1-800-852-9696.
2
Section 1
Caution: Failure to properly follow all installation
instructions may result in personal injury or damage to
your SKYFi or to your vehicle.
Warning: When using this product it is always
important to keep your eyes on the road and your
hands on the wheel. Not doing so could result in injury
to you or to others or in property damage.
To Next Page
Loading...
Need help?
General
