To Next Page

To Previous Page

Aiming the XM Home Antenna

For best reception, aim the home

antenna by following these

instructions:

1. Press the “menu” button on the

SKYFi2 Receiver.

2. Use the scroll wheel to select the

“Antenna Aiming” option. Press

the “XM” button to confirm selection.

3. This display will remain on until

you press the “menu” button

again, so you have plenty of time

to aim the antenna. Slowly turn

and tilt the antenna.The “satellite”

and “terrestrial” signal bars will

change. Find the position that gives

the strongest signal strength (at

least two bars) on either “satellite”

or “terrestrial.”

4. Once you are convinced you have

determined the proper position to

receive the best possible signal,

press the “menu” button to return

to normal operation.

Figure 9. Signal strength indicator.

English Skyfi2 install guide:SKYFi2 install guide layout 9/21/2006 12:09 PM Page 17

Delphi SKYFi2 Installation Guide

Other manuals for Delphi SKYFi2