To Next PageTo Next PageHow to fix 'NO SIGNAL' on my Delphi Receiver?
If your Delphi Receiver displays 'NO SIGNAL', the XM signal might be blocked. Try moving your device away from any obstructed areas, such as an underground garage.
What to do if my Delphi xm2go MyFi SA10113 Receiver displays 'ANTENNA'?
If your Delphi Receiver displays 'ANTENNA', there may be a problem with the built-in or external XM antenna. Try connecting the external antenna, ensuring the cable and connector aren't damaged. If you're using a home stand or vehicle cradle, make sure the home or vehicle antenna is plugged in, even if the wearable antenna is already connected.
Why does my Delphi xm2go MyFi SA10113 Receiver say 'OFF AIR'?
If your Delphi Receiver displays 'OFF AIR', it means the channel you're trying to listen to is not currently broadcasting. Simply tune to another channel.
What does 'LOADING' mean on my Delphi xm2go MyFi SA10113?
If your Delphi Receiver displays 'LOADING', it indicates that your device is acquiring audio or program information from the XM signal. This message should disappear within a few seconds if the signal conditions are good.
How long does 'UPDATING' take on my Delphi xm2go MyFi SA10113?
If your Delphi Receiver displays 'UPDATING', it means your device is being updated with the latest encryption code. Wait a few seconds until the update is complete.
Why is there no audio from my Delphi xm2go MyFi SA10113 when using the home stand connected to a stereo system?
Check to see if you have plugged the AC adaptor into the home stand. The audio line output only works when the AC adaptor is plugged in.
Why is there no audio from my Delphi Receiver when listening through an FM radio?
Make sure that the FM radio and your Delphi Receiver are set to the same frequency.
How to fix static when listening to Delphi Receiver through FM radio?
Change to another FM frequency. If the problem persists and you are using the wireless FM transmitter in a vehicle, change to a hard-wired FM transmitter.
Why doesn't the battery level meter match the charging time on my Delphi Receiver?
Fully charge the battery, then use your Delphi MyFi until the battery is fully exhausted. This calibrates the battery level meter.
General| Model | SA10113 |
|---|---|
| Category | Receiver |
| Service | XM Satellite Radio |
| Battery Life | Up to 5 hours |
| Display Type | LCD |
| Battery | Lithium-Ion |
| Type | Portable Satellite Radio Receiver |
| Power Source | Rechargeable battery |
| Audio Output | Headphone Jack |
| Additional Features | FM transmitter |
| Connectivity | 3.5mm headphone jack |
