EN
6 7
Contents
• Power supply: 230V - 50 Hz +/- 10%
• Class II insulation
• Operating time: 4 minutes
• Electrical power :
TYMOOV 6RP2 / 6RE2 : 40 W
TYMOOV 10RP2 / 10RE2 / D10RP2 : 50 W
TYMOOV 20RP2 / 10RE2 / D20RP2 : 70 W
• X3D radio frequency: 868.7 MHz to 869.2 MHz
• Maximum wireless power < 10 mW Category 2 receiver
• Radio range: 100-300 metres in an open eld, variable depending on the
associated equipment (the range can vary depending on the installation conditions
and the electromagnetic environment)
• Number of associated transmitters: 16 maximum
• A-weighted sound pressure level: LpA ≤ 70 dB(A).
• Degree of protection: IP 44
• Operating temperature: -20°C -> + 60°C
1/ Technical Characteristics
1/ Technical Characteristics ........................................................................7
2/ Motor tting .................................................................................................8
2.1 Crown and wheel assembly ................................................................................. 8
2.2 Assembly in the tube ............................................................................................... 8
2.3 Motor head position ........................................................................ ........................9
2.4 Attaching the motor to the mount .................................................................... 9
3/ Connection ................................................................................................10
3.1 Wiring without push button, only by transmitter .................................. 10
3.2 Wiring with a push button ................................................................................. 10
4/ Starting up for the rst time ...............................................................11
...................................... 11
4.2 Setting stops ........................................................................ ..................................... 12
5/ Modifying stops ......................................................................................16
6/ Associating another transmitter ....................................................... 16
7/ Linking a smoke detector directly to the motor ..........................17
8/ Grouped command ................................................................................. 17
9/ Obstacle detection .................................................................................18
9.1 Setting of the obstacle detection type ......................................................... 18
9.2 Adjustment of the sensitivity of obstacle detection
for Basic detection (only) ................................................................................... 19
10/ Remove one or several associations .............................................19
10.1 Remove the remote control association with the motor .................... 19
10.2 Remove all associations ...................................................................................... 19
11/ Favourite positions ..............................................................................20
12/ Association with an alarm control unit ........................................21
12.1 Associating Performance DxRP2 or xRP2 radio motor ...................... 21
................................................ 22
......................................................... 22
13/ Your remote control is lost or not functioning..........................23
13.1 From a new remote control .............................................................................. 23
13.2 From the push button .......................................................................................... 23
14/ Operation with a push button ........................................................23
15/ Setting stops from the push button (local control) .................24
15.1 Recording 2 automatic stops ........................................................................... 24
..................... 25
..................... 26
15.4 Recording 2 manual stops ................................................................................. 27
15.5 Removing stops ....................................................................................................... 28
16/ Factory reset .........................................................................................28
17/ Troubleshooting .................................................................................... 29
To Next Page
Loading...