Delta Electronics IFD9507 - Page 63

Ethernet Communication Module IFD9507
DVP-PLC Application Manual
61
13 Application Examples – AB Software (Revision:2.10.118.0)
13.1 Serial Slave
Using Delta PLC DVP28SV11T to control AB PowerFlex 40P via IFD9507.
 Configure 22-COMM-E IP
Use AB software “Driver Explorer Application” to Set the PowerFlex40P+22CommE IP.
1. Open Driver Explorer Application.
2. Select “Configure Communication” in Explore.
3. Select “Serial”
Select your RS232 com port, Baud = “38400”, Checksum Type=”CRC-16” and click “OK”