Delta Electronics IFD9507 - Page 71

Ethernet Communication Module IFD9507
DVP-PLC Application Manual
69
8. Open MainRoutine screen
9. Create New Tag “SW1” (Use SW1 to control instruction ON/OFF)
10. Using Move instruction move data to “ENA01EIP: O.Data” register.
Ex：Set Delta PLC Y0 (H0500) ON
Send instruction MODBUS TCP：06 01 05 05 00 FF 00
(1) H0006: Mov “06” to ENA01EIP: O.Data[0]
(2) H0105: Mov “261” to ENA01EIP: O.Data[1]
(3) H0500: Mov “1280” to ENA01EIP: O.Data[2]
(4) HFF00: Mov “65280” to ENA01EIP: O.Data[3]