ENGLISH
93
KEY SIMBOLS LIT BESIDES
THE NUMBERS
FUNCTION
DESCRIPTION
ches itself off again.
During this phase the instrument
appears to be off, but it is active in
operating mode.
If the Serial Out/Memory symbol
lights up when switching on the
instrument with the ON/OFF key,
this means that the instrument
was in storage status.
In this stage the Serial Out and
PROG keys are not enabled.
When this operative mode is disac-
tivated the Serial Out/Memory sym-
bol is not lit.
The total memory capacity availa-
ble is 512kbyte, with the possibi-
lity of storing more than 30,000
readings.
During programming this key is
used both to enter the desired
program and to confirm the value
of the parameter considered.
When pressed repeatedly, the
t
key, sub-function RCD, starts and
stops the record function, which
calculates and stores the maxi-
mum, minimum, mean, integration
(Q) and Time values.
When the RCD key is held down
for more than 2 seconds, the
instrument emits a short beep fol-
lowed by a long one. This con-
firms that the Max., Min., Mean, Q
ENTER
RCD
To Next Page
Loading...
