ENGLISH
107
DUMPING DATA FROM THE MEMORY
Press the PROG key twice until P1 appears on the display.
Press the ENTER key.
The instrument will show DUP, on the top display, and will transmit the data from the instrument’s
internal memory through the serial line.
At the end of data dumping the instrument returns to normal display.
It is possible to stop and resume data dumping by repeatedly pressing the ENTER key.
Once data dumping has been stopped it may be terminated by pressing the PROG key.
Attention: dumping of data does not cause their reset, in this way it is possible to repeat dumping of
the same data several times (for example, obtaining several print-outs).
To obtain the print-out of the data on a printer with parallel interface it is necessary to fit a serial-
parallel adapter (not standard supply).
MEMORY CLEAR
Press the PROG key twice until P1 appears on the display.
Press the
s
key (memory clear sub-function).
The instrument will erase the internal memory, showing CLr on the display.
At the end of the operation the instrument returns to normal display.
To Next Page
Loading...
