EasyManua.ls Logo

Delta OHM DO 9721 - Page 36

Delta OHM DO 9721
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PHOTO/RADIO/THERMOMETER DATA LOGGER rev.V1 R1
IMMEDIATE SERIAL REPORT
DATE TIME ---- A --- ---- B --- ---- A-B --
16-03-2000 11:37:04 00.0 umol/mqs 00.0 umol/mqs 00.0 umol/mqs
16-03-2000 11:37:14 00.1 umol/mqs - 00.1 umol/mqs 00.1 umol/mqs
16-03-2000 11:37:24 - 07.9 umol/mqs 00.0 umol/mqs - 07.9 umol/mqs
16-03-2000 11:37:34 - 13.1 umol/mqs 00.0 umol/mqs - 13.1 umol/mqs
16-03-2000 11:37:44 110 umol/mqs - 00.1 umol/mqs 110 umol/mqs
Maximum Values : 110 umol/mqs 00.0 umol/mqs 110 umol/mqs
Minimum Values : - 13.1 umol/mqs - 00.1 umol/mqs - 13.1 umol/mqs
Average Values : 17.7 umol/mqs - 00.1 umol/mqs 17.8 umol/mqs
Relative to : 104.0 umol/mqs 149.8 umol/mqs - 45.8 umol/mqs
Calibration date 16-03-2000
The highlighted line indicates that the measurements printed were taken in REL mode, and gives
the reference values.
------------------------------------------------------------------------------------------------------------------------------------
* During serial transmission the keyboard is disabled, apart from the Serial Output key and the
ON/OFF key.
* During storage, on the other hand, the DATA CALL, A-B and HOLD keys are also active.
* It is not possible to activate the storage function and the direct transmission function at the same
time.
* If serial transmission is activated display is in HOLD mode the transmission takes place normally,
with the values actually measured (that is not in “hold” mode), the display alone remains frozen at
the values present the moment the HOLD key was pressed.
110
ENGLISH

Related product manuals