To Next PageTo Next Page
Need help?Do you have a question about the Delta 1353-DST Series and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | 1353-DST Series |
| Category | Plumbing Product |
| Language | English |
Warranty coverage for residential parts and finishes, excluding electronics and batteries.
Warranty for residential electronic parts, excluding batteries.
Warranty coverage for commercial products.
Information on obtaining warranty service and replacement parts.
Details on liability limitations and consumer legal rights.
Steps to mount the baseplate, escutcheon, and faucet body.
Instructions for tightening the mounting nut and locking screws.
Steps to install the escutcheon and insert the faucet into the sink.
Instructions for tightening the mounting nut and locking screws.
Instructions for mounting the spray support and inserting the hose.
Steps to connect the diverter clip and hose nipple for the side spray.
Ensuring fittings are free of debris and securing connections with nuts and wrenches.
Instructions for cutting and connecting PEX supply tubing for custom installations.
Solutions for tubing cut perpendicularity and length issues.
Guidance on replacing lost plastic sleeves or connection nuts.
Instructions for preparing the tube and orienting the plastic sleeve.
Steps for inserting the tube into the fitting and sliding the sleeve.
Procedure for tightening the nut over the plastic sleeve.
Instructions for removing the aerator and flushing water lines to remove debris.
Procedure for checking and re-tightening connections for leaks.
Explanation of the two handle limit stop positions and their effects.
Step-by-step guide to adjust the handle limit stop positions.
Troubleshooting steps for low water flow, including aerator cleaning and cartridge replacement.
Procedure to address leaks originating from under the faucet handle.
Steps to resolve leaks occurring at the faucet spout.
Guidance for when the spray attachment is not functioning correctly.
Advice on cleaning the faucet finish without causing damage.
