To Next PageTo Next Page
Need help?Do you have a question about the Delta 46-715 and is the answer not in the manual?
Defines safety symbols and terms used in the manual for hazard recognition.
Provides essential safety precautions and best practices for operating power tools.
Specific safety precautions and warnings tailored for wood lathe operation.
Instructions for removing protective coating and cleaning the machine after unpacking.
Lists all parts and components included in the product packaging.
Step-by-step guide to assembling the lathe's support stand.
Instructions for mounting the main lathe bed onto the assembled stand.
How to install and remove the spur center in the headstock spindle.
Instructions for installing and removing the live center in the tailstock.
How to adjust the locking clamps for headstock and tailstock movement.
Information on positioning and adjusting the tool rest for operation.
Specifics on adjusting the tool rest clamping action for secure positioning.
Steps to install the power switch onto the lathe for safe operation.
How to safely turn the lathe on and off using the power switch.
Method to secure the switch in the 'OFF' position to prevent unauthorized use.
Procedure to unlock the spindle before operating the tool.
How to adjust the variable speed settings while the tool is running.
Steps to ensure proper alignment between headstock and tailstock centers.
General guidance and techniques for spindle turning operations.
Methods for accurately marking the center of the workpiece.
How to securely attach the workpiece to the lathe centers.
Correct placement and adjustment of the tool rest relative to the workpiece.
Technique for making initial rough cuts to shape a cylinder.
Guidance on proper hand placement for optimal tool control.
Using a skew chisel for achieving a smooth cylindrical surface.
How to use the parting tool for making cuts and sizing.
Method for creating a square end on the workpiece using lathe tools.
Technique for creating a shoulder using the parting tool and skew.
How to create decorative beads using chisels and scraping.
Technique for cutting V-shaped grooves into the workpiece.
Methods for making convex or straight-tapered cuts on workpieces.
How to create concave cuts or cove shapes on the workpiece.
Techniques for turning square parts of a workpiece on the lathe.
Guidance on turning workpieces mounted on a faceplate.
How to securely mount work onto a faceplate for turning.
Procedures for turning large workpieces or bowls using different setups.
Recommendations for regular cleaning of the machine's components.
Troubleshooting steps for when the machine fails to power on.
Guidance on lubricating moving parts and surfaces for smooth operation.
Methods to prevent rust on cast iron components of the machine.
Instructions for replacing the drive belt on the headstock.
Information on obtaining parts, service, and warranty support.
General
