To Next PageTo Next Page
Need help?Do you have a question about the Delta 46-460 and is the answer not in the manual?
General| Distance Between Centers | 16.5 inches |
|---|---|
| Motor Power | 1 HP |
| Speed Range | 250 - 4000 RPM |
| Spindle Thread | 1 inch x 8 TPI |
| Spindle Taper | MT2 |
| Tailstock Taper | MT2 |
| Weight | 97 lbs |
| Voltage | 120V |
| Swing Over Bed | 12.5 inches |
Provides fundamental safety precautions for operating machinery to prevent accidents and injury.
Explains hazard symbols and safety terms used in the manual to ensure user understanding.
Details specific safety precautions relevant to the operation and setup of the lathe.
Guidance on electrical circuit requirements and safe connection practices for the machine.
Explains the importance and procedure for grounding the machine to protect against electric shock.
Describes the capabilities and specifications of the Delta Midi-Lathe models.
Lists all components and accessories included in the product packaging.
Instructions for safely unpacking and cleaning the machine before use.
Steps required to assemble and securely mount the lathe to a workbench.
Key safety precautions and general guidelines for operating the lathe.
Details on using, removing, and replacing the faceplate for mounting workpieces.
Instructions for attaching and removing spur and live centers for workpiece support.
Procedures for adjusting, positioning, and removing the tailstock.
Instructions for adjusting the tool rest base and tool rest for proper support.
Guidance on how to change lathe speeds by adjusting pulleys or using electronic controls.
Provides recommended speeds for various workpiece sizes and operations.
Details on using the variable speed control knob to adjust RPMs within a selected range.
Explanation of the indexing pin's function for locking the spindle in multiple positions.
Instructions for safely starting and stopping the lathe using the power switch.
Guidance on securing the power switch with a padlock to prevent unauthorized use.
Information on the motor overload protector and how to reset it if tripped.
General safety and operational guidelines for using the lathe and its accessories.
Provides guidance on securely attaching workpieces to the lathe for turning.
Instructions for safely operating the lathe in reverse rotation.
Guidance for diagnosing and resolving common operational issues with the lathe.
Procedures for routine cleaning and lubrication to ensure machine longevity.
Regular checks and adjustments for fasteners, belt tension, and faceplate set screws.
Step-by-step instructions for safely removing and replacing the drive belt.
Information on how to obtain identical replacement parts for the machine.
Details on obtaining servicing, repairs, and warranty support for DELTA products.
Recommendations and warnings regarding the use of accessories with the lathe.
