Delta 7886 - Full Size Bed Conversion; Step 1: Attach Front Legs to Front Rail

14
M4 Allen Wrench
Supplied
J
N
N
G
H
N
N
Step 1
Section 3: Full Size Bed Conversion
Parts and tools required to complete step.
You have the option to convert the crib to a Full Size Bed. Simply follow steps in reverse order to
disassemble the crib. Then remove the rear legs from the Left Crib End (Part E) and Right Crib End
(Part F) with the M4 Allen Wrench as shown.
Attach the Left Front Leg (Part G) and the Right
Front Leg (Part H) to the Front Rail (Part J) with
(8) M6 x 55mm Bolts (Part N) using the M4 Allen
Wrench as shown.
Store all parts and hardware in a safe place.