8
Fig. 2
1. Air Cleaner
2. Pull Cords (2)
3. 5/16-18x1½" Eye-Bolts (2)
4. 5/16-18 Flange Nuts (2)
1
2
3
4
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
CARTON CONTENTS
ASSEMBLY
ASSEMBLY TOOLS REQUIRED
ASSEMBLY TIME ESTIMATE
Assembly for this machine takes approximately 30 minutes.
No assembly tools are required.
To Next Page
Loading...
