Delta DVP-SA2 User Manual

DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
5-8
OUT Sn
Used for returning to the initial step in the same step sequence. Also for jumping up/down to
non-adjacent steps in the same sequence, or separating steps in different sequences. After the
transition, all output from the previous status will be cleared.
 Returning to
the initial
step in the
same
sequence.
 Jumping
up/down to
non-adjacent
steps in the
same
sequence.
SFC: Ladder diagram:
S0
S21
S24
S25
X7
X2
OUT
OUT
S24
S21
S
S0
S
S2
3
S
X2
S24
S
S25
S
S0
X7
RET
Using OUT S24
Using OUT S0
S25 returns to the initial
step S0 by using OUT.
Jump to another step
of step
Return to initial step
 Separating
steps in
different
sequences.
SFC: Ladder diagram:
S0
S21
S23
X2
OUT
OUT
S1
S41
S43
OUT
S42
S42
S21
S
S0
S
S1
S
X2
S42
S
S43
S
RET
S23
S
RET
Step
sequence
initiated
by S0
Step
sequence
initiated
by S1
Using OUT S42
Two different step sequence: S0 and S1
S23 returns to initial step S0 by using OUT.
S43 returns to initial step S1 by using OUT.
Drive the step in
different sequence

Delta DVP-SA2 Specifications

General

Brand	Delta
Model	DVP-SA2
Category	Controller
Language	English