Need help?Do you have a question about the Delta DVP-EH Series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Program Capacity | 16k steps |
| Program Memory | 16k steps |
| Data Memory | 10k words |
| COM Port | RS-232, RS-485 |
| Series | DVP-EH Series |
| Type | PLC |
| CPU Type | 32-bit |
| Input Voltage | 24 VDC |
| Power Supply | 24 VDC |
| Communication Ports | RS-232, RS-485 |
| Operating Temperature | 0°C ~ 55°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% ~ 95% (non-condensing) |
| High-speed Counters | 4 channels, 200kHz |
Handle OPEN-TYPE extension cards with static electricity protection to prevent damage.
Overview of analog, digital, communication, and memory extension cards.
Terminal layout, system connection, and slave mode examples for DVP-F232.
Terminal layout and wiring example for DVP-F422 RS-422 card.
Pinout, input specs, resolution, impedance, and characteristic curves.
Overview of the DVP-F2DA card with 2 analog output points and characteristics.
Functionality and switch operation of data backup memory cards.
Terminal layouts, functionality, and limitations of RS-232S and RS-485S cards.
Supports EH3, independent communication, master/slave modes, termination resistor.
Details memory card operation and switch control for EH3 series.
Step-by-step guide for vertically inserting function cards into slots.
Instructions for installing and removing backup memory cards.
Connecting to WPLSoft/ISPSoft to detect installed cards and status.
Recommended cable types, wire gauge, and terminal screw torque.
Table matching usage timing and requirements with suitable function cards.
Examples for DVP-F2AD (input) and DVP-F2DA (output) with calculations.
Explains calculation of analog output values for DVP-F2DA.
To Next Page
