Need help?Do you have a question about the Delta DVP-EH3 and is the answer not in the manual?
Use M4 screws for direct mounting according to product dimensions.
Secure PLC to 35mm DIN rail using retaining clip to prevent side-to-side movement.
Details two types of DC inputs: SINK and SOURCE, with equivalent circuit diagrams.
Explains high-speed input circuits for differential LINE DRIVER output.
Illustrates SINK and SOURCE input wiring for DVP32EH00M3/MT.
Shows wiring configurations for PLC relay outputs with various loads.
Details NPN type transistor output wiring and necessary protection circuits.
Wiring for differential output with ASDA-A, A+, ASDA-AB, and ASDA-B series drivers.
Describes how to permanently store PLC program and data in flash ROM.
Explains automatic data restoration from flash ROM to SRAM when power is restored.
General| Model | DVP-EH3 |
|---|---|
| Type | PLC |
| Input Voltage | 24V DC |
| Programming Software | WPLSoft |
| Program Memory | 32k steps |
| Power Supply | 24V DC |
| Program Capacity | 32k steps |
| CPU Type | 32-bit |
| Communication Ports | RS-232, RS-485 |
| Operating Temperature | 0°C to 55°C |
| Analog Input | Available with expansion modules |
| Analog Output | Available with expansion modules |
| Humidity | 5% to 95% (non-condensing) |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
To Next Page
