DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming 
 
Error code  Description 
H620D  UDP Socket the length of sent data exceeds the range 
H620E  UDP Socket the device where data are sent exceeds the range 
H620F  UDP Socket illegal address for receiving data 
H6210  UDP Socket the length of data actually received exceeds the range. 
H6211  UDP Socket the device where data are received exceeds the range. 
H6213  UDP Socket the size of data actually received is larger than the set data. 
H6215  UDP Socket is not connected 
H6217  UDP Socket connection has been triggered 
When S
1
+4=1 (TCP mode) 
Error code  Description 
H2003  The value exceeds the range. 
H600C  The local socket has been used. 
H600D  Ethernet network is not connected. 
H6200  TCP Socket illegal IP address 
H6201  Illegal TCP Socket communication mode setting   
H6202  Illegal TCP Socket mode setting   
H6203  TCP Socket illegal address for sending data 
H6204  TCP Socket the length of sent data exceeds the range 
H6205  TCP Socket the device where data are sent exceeds the range 
H6206  TCP Socket illegal address for receiving data 
H6207  TCP Socket the length of received data exceeds the range 
H6208  TCP Socket the device for receiving data exceeds the range 
H6212  TCP Socket communication timeout 
H6213  TCP Socket the size of data actually received is larger than the set data. 
H6214  TCP Socket connection is rejected by the remote equipment 
H6215  TCP Socket has not been connected 
H6217  TCP Socket connection has been triggered.