Delta DVP-SX2 - C.4.3 Additional Remarks on High-speed Instructions

DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
C-30
Classification API
Mnemonic
PULSE
Function
16 bits
32 bits
281
–
FAND=
–
S
1
＝
S
2
282
–
FAND>
–
S
1
＞ S
2
283
–
FAND<
–
S
1
＜
S
2
284
–
FAND<>
–
S
1
≠ S
2
285
–
FAND<=
–
S
1
≦
S
2
286
–
FAND>=
–
S
1
≧ S
2
287
–
FOR=
–
S
1
＝
S
2
288
–
FOR>
–
S
1
＞ S
2
289
–
FOR<
–
S
1
＜
S
2
290
–
FOR<>
–
S
1
≠ S
2
291
–
FOR<=
–
S
1
≦
S
2
292
–
FOR>=
–
S
1
≧ S
2
C.4.3 Additional Remarks on High-speed Instructions
1. TP only supports the high-speed inputs X0 and X1 (10KHz). (Please refer to section 2.12 for
more information.) TP04P-08TP1R does not support high-speed inputs (only supports up to
500HZ).
2. TP only supports the software counters C235 and C236. The corresponding high-speed
interrupts are I010 and I020. (Please refer to the explanations of API53 and API55 for more
information.)
3. TP onlyt supports the hardware counter C251. The corresponding high-speed interrupt is I010.
There is only one hardware comparator. (Please refer to the explanations of API53 and API55
for more information.)