Chapter 7 Memory Card
b. If you select PC (DUP File), click , select a folder in the Save in list in the Save As dialog box, and
type a filename in the File name box. When you select the backup source for the ISPSoft Project, set
the PLC password. You can set the password to be the same as the Project password, set a new PLC
password, or not set a PLC password. If you do not set a password for the Project, the PLC password
is also not set. When you select Setting new PLC password, the wizard looks like the following
image. And you can set new PLC password and number of the attempt times.
(5)
After that you can see the summary. Make sure that the summary in the CARD Utility wizard is
consistent with the data backup you want to perform, and then click Execute.
To Next Page
Loading...
Need help?
General
