Need help?Do you have a question about the Delta DVP08SP11T and is the answer not in the manual?
General| Model | DVP08SP11T |
|---|---|
| Category | Controller |
| Series | DVP |
| Input Points | 8 |
| Input Type | Digital |
| Output Type | Relay |
| Power Supply | 24V DC |
| Program Memory | 8k Steps |
| Type | PLC |
| Communication Ports | RS-485 |
| High-speed Counters | 2 |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -25°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Pulse Output | 2 channels (20kHz) |
Details of different DVP-Slim models, including power supply, I/O points, types, and dimensions.
Detailed electrical characteristics, including power supply, noise immunity, and environmental specifications.
Specifications for input and output points, including type, voltage, current, and response time.
Diagrams illustrating the terminal configurations for various DVP-Slim models.
Steps for connecting the extension unit to the MPU, including opening the cover and fastening the clip.
Guidance on mounting the DVP-PLC onto a 35mm DIN rail, including securing methods.
Instructions for wiring I/O terminals, including wire gauge, tightening torque, and wire duct separation.
Important precautions for installation and operation, including environmental factors and handling during engineering.
Explanation of DC input types (Sink and Source) with corresponding wiring diagrams.
Details for AC input wiring, including voltage, current, and response time.
Diagrams and explanations for relay output wiring circuits, including components and connections.
To Next Page
