Need help?Do you have a question about the Delta DVP08SM11N and is the answer not in the manual?
General| Model | DVP08SM11N |
|---|---|
| I/O Points | 8 |
| Digital Inputs | 4 |
| Digital Outputs | 4 |
| Input Type | Sink/Source |
| Power Supply | 24V DC |
| Communication Port | RS-232 |
| Series | DVP Series |
| Type | PLC |
| Output Type | Transistor |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -25°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Dimensions | 90mm x 60mm x 70mm |
Safety guidelines for installing and operating the DVP-SLIM OPEN-TYPE device.
Introduction to the DVP-Slim digital I/O extension unit and its capabilities.
Diagrams and labels identifying the physical layout and components of the unit.
Table detailing available DVP-Slim models and their specifications.
Detailed electrical characteristics, noise immunity, and environmental ratings.
Specifications for input and output points, including type, voltage, and response time.
Current/voltage specifications and response times for Relay and Transistor outputs.
Graphs illustrating output operation based on contact current and load type.
Visual representation of terminal connections for various DVP-Slim models.
Step-by-step guide for physically connecting DVP-Slim extension units.
Instructions for securing the DVP-PLC to a 35mm DIN rail.
Guidelines for proper wiring, including wire gauge and duct separation.
Notes on suitable operating environments and engineering practices.
How input/output point numbers are assigned when using extension units.
Explanation of Sink and Source DC input wiring configurations.
Details on 110VAC input voltage, current, and response time.
Diagram and explanation for relay output wiring circuits.
Wiring diagrams and protection notes for sink transistor outputs.
Wiring diagrams and protection notes for source transistor outputs.
To Next Page
