49
Disconnect in the “OFF” position, verify the PV input polarity
once more simply by carefully using a 600 V, DC rated digital
volt meter and probing the positive (+) and negative (-) PV array
connections.
Débranchez l‘appareil lorsqu‘il est éteint (« OFF ») puis vériez à
nouveau la polarité de l‘entrée PV en utilisant simplement avec
précaution un voltmètre numérique de valeur nominale de 600
Vcc et en prélevant les mesures au niveau des connexions positi-
ve (+) et négative (-) du groupe solaire PV.
5.1.2 LED Status
Label Designation Color
Operation(OPER)
Red / Green
Battery(BAT)
Red / Green
Wireless
Communication(COMM)
Red / Green
Information(INFO)
Red / Green
Fault(FAULT)
Red / Green
5.1 LED Indication
5.1.1 Introduction
There are ve LEDs in the front side of the inverter, from left to right, it is used for indicating
status of operation, battery, communication, information and fault.