Chapter 7 InsightPower SNMP IPv6 for rSTS
27
Command Description Parameter Response
Prefer Report the preferred source. N/A S1 or S2
Sens Report the sensitivity. N/A hi or low
Mode Report the operation mode. N/A
Initialization
Diagnosis
Off
S1
S2
Safe
Fault
Link
Check current MODBUS
connection.
N/A
1- normal/
2- abnormal/
3- upgrading
Input/ Output Parameters
Vout Report the output voltage. N/A #.#
Iout Report the output current. N/A #.#
Vs1 Report the primary voltage. N/A #.#
Vs2 Report the secondary voltage. N/A #.#
Fs1 Report the primary frequency. N/A #.#
Fs2
Report the secondary
frequency.
N/A #.#
Conguration
Vtp2s
Report the primary to
secondary trip voltage.
N/A #.#
Vts2p
Report the secondary to
primary trip voltage.
N/A #.#
Vbp2s
Report the primary to
secondary brownout voltage.
N/A #.#
Vbs2p
Report the secondary to
primary brownout voltage.
N/A #.#
Tdp2s
Report the recovery time
of transfer from primary to
secondary.
N/A #.#