Delta VFD022M23B - User Manual

English-1
Preface
Thank you for choosing DELTA’s high-performance VFD-M Series. The VFD-M Series is
manufactured with high-quality components and materials and incorporates the latest microprocessor
technology available.
 Getting Started
This quick start will be helpful in the installation and parameter setting of the AC motor drives. To
guarantee safe operation of the equipment, read the following safety guidelines before
connecting power to the AC motor drives. For detail information, refer to the VFD-M User Manual
on the CD supplied with the drive.
DANGER!
1. AC input power must be disconnected before any wiring to the AC motor drive is made.
2. A charge may still remain in the DC-link capacitors with hazardous voltages, even if the power
has been turned off. To prevent personal injury, please ensure that power has turned off before
opening the AC motor drive and wait ten minutes for the capacitors to discharge to safe voltage
levels.
3. Never reassemble internal components or wiring.
4. The AC motor drive may be destroyed beyond repair if incorrect cables are connected to the
input/output terminals. Never connect the AC motor drive output terminals U/T1, V/T2, and
W/T3 directly to the AC mains circuit power supply.
5. Ground the VFD-M using the ground terminal. The grounding method must comply with the laws
of the country where the AC motor drive is to be installed. Refer to the Basic Wiring Diagram.
6. VFD-M series is used only to control variable speed of 3-phase induction motors, NOT for 1-
phase motors or other purpose.
7. VFD-M series shall NOT be used for life support equipment or any life safety situation.
WARNING!
1. DO NOT use Hi-pot test for internal components. The semi-conductor used in AC motor drive
easily damage by high-pressure.
2. There are highly sensitive MOS components on the printed circuit boards. These components
are especially sensitive to static electricity. To prevent damage to these components, do not
touch these components or the circuit boards with metal objects or your bare hands.
3. Only quality person is allowed to install, wire and maintain AC motor drive.
CAUTION!
1. Some parameters settings can cause the motor to run immediately after applying power.
2. DO NOT install the AC motor drive in a place subjected to high temperature, direct sunlight,
high humidity, excessive vibration, corrosive gases or liquids, or airborne dust or metallic
particles.
3. Only use AC motor drives within specification. Failure to comply may result in fire, explosion or
electric shock.
4. To prevent personal injury, please keep children and unqualified people away from the
equipment.
5. When the motor cable between AC motor drive and motor is too long, the layer insulation of the
motor may be damaged. Please use a frequency inverter duty motor or add an AC output
reactor to prevent damage to the motor. Refer to appendix B Reactor for details.
6. The rated voltage for AC motor drive must be ≤240V for 230V models (≤120V for 115V models,
≤480V for 460V models, ≤600V for 575V models) and the mains supply current capacity must
be ≤5000A RMS (≤10000A RMS for the ≥40hp (30kW) models).

Summary

Preface

Getting Started

Quick guide for AC motor drive installation and parameter setting.

Safety Guidelines

Crucial safety information including DANGER, WARNING, and CAUTION notices.

Specifications

Voltage Class Overview

Overview of specifications related to different voltage classes.

Digital Keypad

How to Operate Keypad

Explains the operation of the digital keypad and its functions.

Terminal Explanations

Control Terminal Wiring

Details the factory settings for NPN mode control terminal wiring.

Parameter Settings Summary

Source of Frequency Command

Defines how the frequency command source is selected.

Source of Operation Command

Defines how the operation command source is selected.

Stop Method

Specifies the method used to stop the motor.

Fault Codes

Over Current Faults

Describes faults related to abnormal current increase and over-current conditions.

Over Voltage Faults

Describes faults related to excessive DC bus voltage.

Overheating Faults

Describes faults related to excessive heat sink temperature.

Dimensions

VFD004 M21 A;23 A Series Dimensions

Mechanical dimensions for specific VFD-M models.

VFD002 M11 A Series Dimensions

Mechanical dimensions for specific VFD-M models.

Delta VFD022M23B Specifications

General

Brand	Delta
Model	VFD022M23B
Category	DC Drives
Language	English