Chapter 13 Warning CodesC2000 Plus
ID No. Display on LCD Keypad Warning Name Description
30
Copy model error 3
(SE3)
Keypad COPY error 3: copy model error
Action and Reset
Action condition
“SE3”
warning occurs when different drive identity codes are found during
copying parameters.
Action time Immediately act when the error is detected
Warning setting parameter N/A
Reset method Manual reset
Reset condition N/A
Record N/A
Cause Corrective Actions
Keypad copy between different
power range drives
It is mainly to prevent parameter copies between different HP/models.
To Next Page
Loading...