Chapter 11 Summary of Parameter SettingsMS300
210
Operation Command
Source (AUTO,
REMOTE)
0: Digital keypad
1: External terminals
2: RS-485 communication input
3: CANopen communication card
5: Communication card (does not include CANopen card)
NOTE:
HOA (Hand-Off-Auto) function is valid only when you use with
MO function setting 42 and 56 or with KPC-CC01 (optional)
0: Ramp to stop
1: Coast to stop
0: Enable forward / reverse
1: Disable reverse
2: Disable forward
Digital Operator (Keypad)
Frequency Command
Memory
User-Defined
Characteristics
bit 0–3: user-defined decimal places
0000h-0000b: no decimal place
0001h-0001b: one decimal place
0002h-0010b: two decimal places
0003h-0011b: three decimal places
bit 4–5: user-defined unit
000xh: Hz
001xh: rpm
002xh: %
003xh: kg
004xh: m/s
005xh: kW
006xh: HP
007xh: ppm
008xh: 1/m
009xh: kg/s
00Axh: kg/m
00Bxh: kg/h
00Cxh: lb/s
00Dxh: lb/m
00Exh: lb/h
00Fxh: ft/s
010xh: ft/m
011xh: m
012xh: ft
To Next Page
Loading...