Delta VFD17AMS23ANSAA

Chapter 14 Fault CodesMS300
582
ID
Display on LCD Keypad
Fault Name
Fault Descriptions
43
PG feedback loss
(PGF2)
Pr.10-00 and Pr.10-02 is not set in the PG control
mode. When press “RUN” key, PGF2 fault occurs.
Action and Reset
Action Condition
Software detection
Action Time
Immediately act
Fault Treatment Parameter
N/A
Reset Method
Manual reset
Reset Condition
Immediately reset
Record
Yes
Cause
Corrective Actions
Incorrect setting of encoder
parameter
Reset encoder parameters (Pr.10-00 and Pr.10-02)
Incorrect selection of the control
mode
Choose the correct control mode.