Delta VFD1A5MS43ANSAA User Manual

Chapter 11 Summary of Parameter SettingsMS300
241
Pr.
Explanation
Settings
Default

07-16
Dwell Frequency at
Acceleration
0.00–599.00 Hz
0.00

07-17
Dwell Time at Deceleration
0.00–600.00 sec.
0.00

07-18
Dwell Frequency at
Deceleration
0.00–599.00 Hz
0.00

07-19
Fan Cooling Control
0: Fan is always ON
1: Fan is OFF after the AC motor drive stops for one
minute.
2: Fan is ON when the AC motor drive runs, fan is OFF
when the AC motor drive stops.
3: Fan turns ON when temperature (IGBT) reaches
around 60
o
C.
3

07-20
Emergency Stop (EF) &
Force to Stop Selection
0: Coast to stop
1: Stop by the first deceleration time
2: Stop by the second deceleration time
3: Stop by the third deceleration time
4: Stop by the fourth deceleration time
5: System deceleration
6: Automatic deceleration
0

07-21
Automatic Energy-Saving
Setting
0: Disable
1: Power factor energy-saving improvement
0

07-23
Automatic Voltage
Regulation (AVR) Function
0: Enable AVR
1: Disable AVR
2: Disable AVR during deceleration
0

07-24
Torque Command Filter
Time
0.001–10.000 sec.
0.050

07-25
Slip Compensation Filter
Time
0.001–10.000 sec.
0.100

07-26
Torque Compensation Gain
IM: 0–10 (when Pr.05-33 = 0)
PM: 0–5000 (when Pr.05-33 = 1 or 2)
1

07-27
Slip Compensation Gain
0.00–10.00
0.00
(Default value
is 1.00 in SVC
mode)

07-29
Slip Deviation Level
0.0–100.0%
0: No detection
0

07-30
Over-Slip Deviation
Detection Time
0.0–10.0 sec.
1.0

07-31
Over-Slip Deviation
Treatment
0: Warn and continue operation
1: Fault and ramp to stop
2: Fault and coast to stop
0

Delta VFD1A5MS43ANSAA Specifications

General

Brand	Delta
Model	VFD1A5MS43ANSAA
Category	DC Drives
Language	English