Delta VFD1A5MS43ANSAA User Manual

Chapter 12 Descriptions of Parameter SettingsMS300
421

09-76
Communication Card IP Address 1 (for EtherNet)

09-77
Communication Card IP Address 2 (for EtherNet)

09-78
Communication Card IP Address 3 (for EtherNet)

09-79
Communication Card IP Address 4 (for EtherNet)
Default: 0
Settings
0–255
 Use Pr.09-76–Pr.09-79 with a communication card.

09-80
Communication Card Address Mask 1 (for EtherNet)

09-81
Communication Card Address Mask 2 (for EtherNet)

09-82
Communication Card Address Mask 3 (for EtherNet)

09-83
Communication Card Address Mask 4 (for EtherNet)
Default: 0
Settings
0–255

09-84
Communication Card Gateway Address 1 (for EtherNet)

09-85
Communication Card Gateway Address 2 (for EtherNet)

09-86
Communication Card Gateway Address 3 (for EtherNet)

09-87
Communication Card Gateway Address 4 (for EtherNet)
Default: 0
Settings
0–255

09-88
Communication Card Password (Low Word) (for EtherNet)

09-89
Communication Card Password (High Word) (for EtherNet)
Default: 0
Settings
0–99

09-90
Reset Communication Card (for EtherNet)
Default: 0
Settings
0: Disable
1: Reset to defaults

09-91
Additional Settings for the Communication Card (for EtherNet)
Default: 0
Settings
bit 0: Enable IP filter
bit 1: Enable Internet parameters (1 bit)
When the IP address is set, this bit is enabled. After updating the
parameters for the communication card, this bit changes to disabled.
bit 2: Enable login password (1 bit)
When you enter the login password, this bit is enabled. After updating
the communication card parameters, this bit changes to disabled.

Delta VFD1A5MS43ANSAA Specifications

General

Brand	Delta
Model	VFD1A5MS43ANSAA
Category	DC Drives
Language	English