Chapter 10 Digital KeypadC2000 Plus
10-8
10. Digital keypad STOP function (Pr.00-32)
11. Max. operation frequency (Pr.01-00)
12. Motor 1 rated / base frequency (Pr.01-01)
13. Motor 1 rated / base voltage (Pr.01-02)
14. Motor 1 min. output frequency (Pr.01-07)
15. Motor 1 min. output voltage (Pr.01-08)
16. Output frequency upper limit (Pr.01-10)
17. Output frequency lower limit (Pr.01-11)
18. Acceleration time 1 (Pr.01-12)
19. Deceleration time 1 (Pr.01-13)
20. Full-load current for induction motor 1
(Pr.05-01)
21. Rated power for induction motor 1
(Pr.05-02)
22. Rated speed for induction motor 1
(Pr.05-03)
23. Number of poles for induction motor 1
(Pr.05-04)
24. No-load current for induction motor 1
(Pr.05-05)
25. Over-voltage stall prevention (Pr.06-01)
26. Over-current stall prevention during
acceleration (Pr.06-03)
27. Derating protection (Pr.06-55)
28. Software brake chopper action level
(Pr.07-00)
29. Emergency stop (EF) & force to stop
selection (Pr.07-20)
30. Torque command filter time (Pr.07-24)
31. Slip compensation filter time (Pr.07-25)
32. Slip compensation gain (Pr.07-27)
4. FOCPG Mode
01: Password Decoder
Items
1. Parameter protection password input
(Pr.00-07)
2. Parameter protection password setting
(Pr.00-08)
3. Control mode (Pr.00-10)
4. Speed control mode (Pr.00-11)
5. Master frequency command source (AUTO)
/ Source seletion of the PID target
(Pr.00-20)
6. Operation command source (AUTO)
(Pr.00-21)
7. Stop method (Pr.00-22)
8. Max. operation frequency (Pr.01-00)
9. Motor 1 rated / base frequency (Pr.01-01)
10. Motor 1 rated / base voltage (Pr.01-02)
11. Output frequency upper limit (Pr.01-10)
12. Output frequency lower limit (Pr.01-11)
13. Acceleration time 1 (Pr.01-12)
14. Deceleration time 1 (Pr.01-13)
15. Full-load current for induction motor 1
(Pr.05-01)
16. Rated power for induction motor 1
(Pr.05-02)
17. Rated speed for induction motor 1
(Pr.05-03)
18. Number of poles for induction motor 1
(Pr.05-04)
19. No-load current for induction motor 1
(Pr.05-05)