To Next PageTo Next Page
Need help?Do you have a question about the Delta VFD4A8ME21ANSAA and is the answer not in the manual?
Details on the nameplate of the AC motor drive, including model, input/output voltage, and certifications.
Guidelines for minimum mounting clearances and installation to ensure proper operation and heat dissipation.
Diagram illustrating the system wiring for the AC motor drive and its components.
Detailed instructions and precautions for wiring the AC motor drive correctly.
Diagram showing the main circuit connections and terminal descriptions for the drive.
Specifications and dimensions for ring lugs used in main circuit terminal wiring.
Selection guide for brake resistors and brake units based on motor specifications.
Table listing recommended non-fuse circuit breaker ratings for various models.
Chart detailing recommended branch circuit fuse outputs for different models.
Information on AC input reactors, their installation, dimensions, and specifications.
Introduction to digital keypads, communication settings, and keypad functions.
Description and corrective actions for over-current fault during acceleration.
Description and corrective actions for over-current fault during deceleration.
Description and corrective actions for over-current fault during steady operation.
Description and corrective actions for ground fault conditions.
Description and corrective actions for over-current fault when the drive is stopped.
Description and corrective actions for over-voltage fault during acceleration.
Description and corrective actions for over-voltage fault during deceleration.
Description and corrective actions for over-voltage fault at constant speed.
Description and corrective actions for over-voltage fault at stop.
Description and corrective actions for low-voltage fault during acceleration.
Description and corrective actions for low-voltage fault during deceleration.
Description and corrective actions for low-voltage fault at constant speed.
Description and corrective actions for low-voltage fault at stop.
Description and corrective actions for phase loss protection.
Description and corrective actions for IGBT over-heating.
Description and corrective actions for IGBT hardware failure in temperature detection.
Description and corrective actions for overload fault due to excessive output current.
Description and corrective actions for EoL1 protection fault.
Description and corrective actions for EoL2 protection fault.
Description of STO error codes and troubleshooting steps.
Step-by-step guide to verify the functionality of the STO and related detection functions.
General