Need help?Do you have a question about the Delta VFD-B and is the answer not in the manual?
General| Series | VFD-B |
|---|---|
| Power Range | 0.4kW to 15kW |
| Control Method | V/F Control, Sensorless Vector Control |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in |
| Communication | RS-485 |
| Protection Features | Over-voltage, Over-current, Overheat, Under-voltage, Ground fault, Short circuit |
Steps and considerations for preparing the AC motor drive before installation and wiring.
Guidelines for the proper vertical mounting and space requirements for heat dissipation.
General wiring information and precautions, including applicable codes and safety guidelines.
Essential steps and safety precautions for basic wiring of the AC motor drive.
Diagram and explanation of external components and their wiring connections.
Details on connecting the mains power and control terminals of the AC motor drive.
Explanation of digital input and output terminals, their functions, and factory settings.
Specifications and diagrams for connecting main circuit terminals across different drive frames.
Crucial checks and preparations required before applying power to the AC motor drive.
Steps for performing a trial run to verify correct operation after installation.
Detailed description of the VFD-PU01 digital keypad, including keys and display messages.
Step-by-step guide on navigating menus, setting parameters, and modifying data on the keypad.
Comprehensive list of VFD-B parameters organized by group, with explanations and factory settings.
Guidance on selecting parameters for specific applications like speed search and DC brake.
Detailed explanations and tables for user parameters, basic parameters, and others.
Table listing common fault codes, descriptions, and corrective actions for troubleshooting.
Describes the three methods available to reset the AC motor drive after resolving a fault.
Flowchart to diagnose and resolve over-current faults (ocA, ocd, OC).
Troubleshooting steps for ground fault (GFF) issues.
Diagnostic flowchart for over-voltage (OV) faults.
Troubleshooting guide for low voltage (Lv) faults.
Steps to diagnose and resolve overheating (OH) issues.
Troubleshooting procedure for overload (OL, OL1, OL2) faults.
Troubleshooting steps for phase loss (PHL) faults.
Diagnostic flowchart for when the motor fails to run.
Steps to diagnose and resolve motor stalling issues during acceleration.
Critical safety warnings and precautions for maintenance personnel.
Formulas and calculations for determining the appropriate AC motor drive capacity for single/multiple motors.
Important precautions regarding AC Motor Drive selection, installation, and parameter settings.
To Next Page