Delta WHITEWATER DF Series - SERVICE POLICY; DELTA TREATMENT SYSTEMS INDIVIDUAL MECHANICAL WASTEWATER TREATMENT SYSTEM SERVICE POLICY; COMPLAINTS

Delta Treatment Systems • 9125 Comar Drive, Walker, LA 70785 • 1-800-219-9183 • www.deltatreatment.com
40
SERVICE POLICY
DELTA TREATMENT SYSTEMS
INDIVIDUAL MECHANICAL WASTEWATER TREATMENT SYSTEM
SERVICE POLICY
INITIAL POLICY:
A two-year initial service policy shall be furnished to the user by the manufacturer or the distributor through the dealer. This policy
may be included in the price of the system, provided the state in which the system is being installed has adapted NSF Policies as
part of their state rules
1. An inspection/service call every six months, which includes inspection, adjustment, and servicing of the mechanical and
electrical component parts as necessary to ensure proper function.
2. An euent quality inspection every six months consisting of a visual check for color, turbidity, scum overow, and an
examination for odors.
3. If any improper operation is observed that cannot be corrected at that time, the user shall be notied immediately in writing of
the conditions and the estimated date of correction. THIS POLICY DOES NOT INCLUDE PUMPING SLUDGE FROM UNIT IF
DEEMED NECESSARY.
CONTINUING SERVICE POLICY:
An annually renewable service policy aording the same coverage as the Initial Service Policy is available. Consult your dealer for
pricing information. The annually renewable service policy should provide the same service checks as the initial NSF service policy
and should be performed twice per year.
PARTS:
Replacement parts or components may be obtained from your local distributor or contact Delta Treatment Systems for information.
COMPLAINTS:
In order for Delta Treatment Systems to properly address complaints, we require that you put in writing the date and nature of the
complaint as detailed as possible. This MUST include the serial number of your system.
Send to: Delta Treatment Systems
9125 Comar Drive
Walker, LA 70785