DEMA ATLAS 844P Series - Parts and Specifications; Replacement Parts; Accessory Replacement Parts

DEMA ATLAS 844P
™
SERIES
LAUNDRY CONTROL
I-907 Page 11 of 17
Rev. C-33371
Replacement Parts
Replacement Parts
Item No. DEMA Part Number Description
1 IQ-85 Control Board
2
(not shown)
EDSM Remote Kit
3 84.65.6 STU Kit
4
80.59.60
80.59.105
60 RPM Gear/Motor 24VDC
105 RPM Gear/Motor 24VDC
6 84.65.9 80VA Power Supply Kit
7 83.11 Power Switch (Toggle Switch)
8 84.65.4 Toggle Switch Boot Mounting Nut
13 84.48.2 Fuse 2A, 250V 5 X 20mm Kit
14
(not shown)
84.27.3 25 Foot, RJ-45 Patch Cable (connection between STU-DSM/FSM-IQ-80)
15
(not shown)
84.27.4 6 Foot, RJ-45 Patch Cable (connection between STU-DSM/FSM-IQ-80)
Accessory Replacement Parts
DEMA Part No Description
25-68-20 20 ft of ¼” O.D. LDPE Tubing
25-68-40 40 ft of ¼” O.D. LDPE Tubing
25-68-60 60 ft of ¼” O.D. LDPE Tubing
25-68-80 80 ft of ¼” O.D. LDPE Tubing
25-68-100 100 ft of ¼” O.D. LDPE Tubing
25-68-120 120 ft of ¼” O.D. LDPE Tubing
25-115 20 ft of 3/8” O.D. LDPE Tubing
25-115-40 40 ft of 3/8” O.D. LDPE Tubing
25-115-60 60 ft of 3/8” O.D. LDPE Tubing
25-115-80 80 ft of 3/8” O.D. LDPE Tubing
25-115-100 100 ft of 3/8” O.D. LDPE Tubing
25-115-120 120 ft of 3/8” O.D. LDPE Tubing
80-66 10” PVC Pick-up Tube Assembly
80-66-2 18” PVC Pick-up Tube Assembly
81-16-1 8” Tie Wrap (for securing wiring or tubing)