NO.6 Detailed Function Description
71
[Note] When the maximum parameter value of function code is less than (256) FFH,
data length is 02H. For example, function code P029 (1DH) shall be set as 1.0s (0AH),
for maximum value of P029 is 25.0s (FAH) and less than FFH, at this time data length
LEN=02H and data content DATA is 1DH 0AH.
3. 03 Write command to control inverter state (necessarily set P001 as 2)
Command list: Parameters value in the list serve as data content (DATA)
[Example] Write command to control inverter state to realize operating function of the
inverter.
[Note] Received data CNST refers to the data consisting of 1 byte, after being written
To Next Page
Loading...
Need help?
General
