DEMA D5M Series User Manual

NO.2 Product Introduction
5
status, fault, etc.
Communication control
RS-485
Operating temperature
-10~40℃
Humidity
Relative humidity ranging from 0 to 95% (without
condensation)
Vibration
Below 0.5G
Frequency
control
Range
0.10-400.00Hz
Accuracy
Digital type: 0.01% (-10-40℃); analog type: 0.1%
(25±10℃)
Setting resolution
Digital type: 0.01Hz; analog type: 1% of the
maximum operating frequency
Output resolution
0.01Hz
Keyboard setting
mode
Set as directly
Analog setting
mode
External voltage 0-5V, 0-10V, 4-20mA, 0-20mA.
Other functions
Three hopping frequencies (lower-frequency limit,
startup frequency and stop frequency) can be set
respectively
General
control
Acceleration/decele
ration control
4 optional acceleration/deceleration time (0.1-6500
seconds)
V/F curve
V/F curve can be set optionally
Torque control
Torque can be set rising with the maximum of
10.0%, and it can reach 150% when starting at
1.0Hz
Multi-function input
terminal
6-way programmable input; realize the functions
like 8-segment speed control, program running,
4-segment acceleration/deceleration switching,
UP, DOWN function, counter, external emergency
stop, etc.
Multi-function
output terminal
1-way programmable output; realize running, zero
speed, counter, external exception, program
running and other indications as well as alarm.
Other functions
Automatic voltage regulation (AVR), deceleration
stop or free stop, DC brake, automatic reset and
restart, frequency tracking, PLC program control,
transverse control, draft control, automatic
energy-saving running, carrier regulation (up to
20KHz), etc.

DEMA D5M Series Specifications

General

Brand	DEMA
Model	D5M Series
Category	Inverter
Language	English