3
21492044.indd/131107
Accompanying documents:
DRC-MP operating instructions 214 994 44 720 IS 975
DRC-DR operating instructions 214 953 44 720 IS 975
Page
9 Information menu in connection with DRC-DR 33
9.1 Activating the Information menu 33
9.2 Selecting the information source 33
9.3 Activating the display travelling hoist selection 33
9.4 Starting screen 33
9.5 Navigating in the information menu 33
9.6 Data of the information menu 34
10 Technical data 35
10.1 Dimensions 35
10.2 International postal registration 36
11 Eliminating faults 37
EC conformity declaration 40
Programming parameters of the DRC-10 hand-held transmitter
(For authorized personnel only) 41
1 Menu for programming the hand-held transmitter 42
1.1 Activating the menu 42
1.2 Displaying the current parameters 42
1.3 Displaying the serial number of the hand-held transmitter,
Parameter code 001 42
1.4 Displaying the software version of the hand-held transmitter,
Parameter code 002 43
1.5 Displaying the hardware version of the hand-held transmitter,
Parameter code 003 43
1.6 Displaying and entering a fixed frequency channel,
Parameter code 004 43
1.7 Displaying and entering the cut-out time in STOP mode,
Parameter code 005 44
1.8 Displaying and entering the cut-out time in Run mode,
Parameter code 006 45
1.9 Displaying and entering the max. quick charging time,
Parameter code 007 46
1.10 Frequency hopping 46
To Next Page
Loading...
Need help?
General
