DEMAG DRC-10 User Manual

2
21492044.indd/131107
Contents
Manufacturer
Demag Cranes & Components GmbH
P.O. Box 67, D-58286 Wetter
Telephone (+2335) 92-0 · Telefax (+2335) 927676
www.demagcranes.com
Page
1 Foreword 4
1.1 Copyright 4
1.2 Customer service 4
1.3 Liability for Defects 5
1.4 Limitations of liability 5
1.5 Definitions 6
2 Safety instructions 7
2.1 Symbols 7
2.2 Appropriate use 7
2.3 Inappropriate use 9
2.4 Basic information on safety 9
2.5 Safety instructions for assembly and disassembly 10
2.6 Safety instructions when first putting into service
after completing installation 11
2.7 Safety instructions for operation 11
3 General description 12
3.1 Transmitter/receiver interface 12
3.2 Transmission method 12
4 Selection of unit 14
4.1 DRC-10 scope of delivery 14
4.2 Available radio receivers 14
4.3 Accessories for crane identification 14
4.4 Casing seal/seal breakage 14
5 Identification and display functions 15
5.1 Hand-held transmitter 15
5.2 LCD display 16
5.3 Identification labels for the crane installation 20
6 Putting the radio control system into operation after installation 22
6.1 Putting into operation 22
6.2 Putting a radio remote control system with DRC-10 into operation 22
6.3 Configuration of a radio remote control system for DRC-DR 26
7 Operation of the radio control system 27
7.1 Checks before starting work 27
7.2 Crane operation/Run 28
7.3 Taking the unit out of service at the end of the shift (standby) 29
7.4 Operating statuses of the radio control system 29
8 Power supply of the hand-held transmitter 31
8.1 Display of available battery capacity 31
8.2 Charging the batteries 31
8.3 Replacing the batteries 32

DEMAG DRC-10 Specifications

General

Brand	DEMAG
Model	DRC-10
Category	Transmitter
Language	English