Deming 5064 - User Manual

A Crane Co. Company
IMPORTANT! Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written noti¿ cation.
420 Third Street 83 West Drive, Bramton
Piqua, Ohio 45356 Ontario, Canada L6T 2J6
Phone: (937) 778-8947 Phone: (905) 457-6223
Fax: (937) 773-7157 Fax: (905) 457-2650
www.cranepumps.com
Form No. 120021-Rev. E
Series: 5060
Single Stage, Double Suction
®
INSTALLATION, OPERATION & MAINTENANCE MANUAL
Horizontal Split Case Centrifugal Pumps

Summary

SAFETY FIRST!

INSTALLATION

Foundation Design and Anchorage

Flexible Coupling Alignment

Instructions for aligning pump and driver flexible couplings.

Field Alignment - Horizontal Units

Field Alignment - Vertical Units

Lubrication Requirements

Pump Rotation Check

OPERATION

Pump Priming Procedures

Methods for priming the pump before starting.

Starting the Pump

Steps and checks before starting the pump.

MAINTENANCE

Lubrication Procedures

Pump Disassembly

Step-by-step guide for complete pump disassembly.

Pump Reassembly

Step-by-step guide for reassembling the pump.

TROUBLESHOOTING

No Liquid Delivered

Identifies causes for the pump not delivering any liquid.

Not Enough Liquid Delivered

Lists potential causes for reduced liquid delivery.

Not Enough Pressure

Diagnoses reasons for insufficient pump pressure.

Pump Works Then Quits

Troubleshoots scenarios where the pump stops working.

Excessive Power Consumption

Excessive Pump Vibration

Pump and;or Motor Noise

Deming 5064 Specifications

General

Brand	Deming
Model	5064
Category	Water Pump
Language	English