Demtech Pro-Wedge XL - Factory Servicing; Reference Documents; Appendix A: Welder Wiring Interconnect Diagram

Rev. D, January 2021
Pro-Wedge XL Operator’s Manual Page 23
8 Factory Servicing
In the event your Pro-Wedge should require factory service, the entire welder needs to be
returned to the factory. Refer to the following step for preparing the Pro-Wedge for return.
Carefully pack the Pro-Wedge in the reusable portable shipping/storage case provided with the
welder for return to DEMTECH Services, Inc.’s factory for service. Unless previous
arrangements are made shipping charges and insurance are the customer's responsibility. Ship
the Pro-Wedge to DEMTECH Services, Inc. at:
DemTech Services, Inc
Ship to address: 6414 Capitol Avenue
Diamond Springs, CA 95619
U.S.A.
9 Reference Documents
Appendix A, Welder Wiring Interconnect Diagram
Refer to Appendix A for the Pro-Wedge Welder Wiring Interconnect Diagram.
Appendix B, Pro-Wedge Product Warranty
Refer to Appendix B for the DEMTECH product warranty.